.

Saturday, September 28, 2019

Application Of Types Of Lubricant

Application Of Types Of Lubricant A lubricant is a substance (often a liquid) introduced between two moving surfaces to reduce the friction between them, improving efficiency and reducing wear. They may also have the function of dissolving or transporting foreign particles and of distributing heat. Basically there are many types of lubricants; solid lubricant, liquid lubricant and gaseous lubricant. They have their own purpose and application. They are as follows: Purposes: Almost all the Lubricants perform the following key functions. Keep moving parts apart Reduce friction Transfer heat Carry away contaminants often it is made from a mineral oil and a soap. It may be applied in various ways: by packing enclosed parts with it, by pressing it onto moving parts from an adjacent well, by forcing it through grease cups by a spring device, and by pumping it through pressure guns. Solid lubricants are especially useful at high and low temperatures, in high vacuums, and in other applications where oil is not suitable; co mmon solid lubricants are graphite and molybdenum disulfide. Application of Liquid Lubricants Liquid lubricants may be characterized in many different ways. One of the most common ways is by the type of base oil used. Following are the most common types. Lanolin (wool grease, natural water repellant) Water Mineral oils Vegetable (natural oil) Synthetic oils Other liquids Mechanical devices to supply lubricants are called lubricators. A simple form of lubricator is a container mounted over a bearing or other part and provided with a hole or an adjustable valve through which the lubricant is gravity-fed at the desired rate of flow. Wick-feed oilers are placed under moving parts, and by pressing against them they feed oil by capillary action. Horizontal bearings are frequently oiled by a rotating ring or chain that carries oil from a reservoir in the bearing housing and distributes it along the bearing through grooves or channels. Bath oiling is useful where an oil-tight reservoir can be provided in which the bearing journal may be submerged; the pool of oil helps to carry away heat from contact surfaces. Splash-oiling devices are used where gears, bearings, or other parts contained in housings have moving parts that dip into the lubricant and splash it on the bearings or into distribution channels. Centralized oiling systems usually consist of a reservoir, pump, and tubes through which oil is circulated, while heaters or coolers may be introduced to change the viscosity of the lubricant for various parts of the system. Many oiling operations are automatically synchronized to start and stop with the machinery.

No comments:

Post a Comment